[Responded] Printpress causes avatar to be stuck.

4/30/2018 2:11 PM

Reproduction Rate: 75%
Blocker? no
Details: I position the magic printing press bellow the stairs on the second floor of my
Viking pavilion stairs. I used the press and ended up stuck in the stairs above to the point
that I was floating and had to use the /stuck command.
Steps to Reproduce: place a magic printing press under stairs (long end under the stairs).
Use the magic printing press, close menu. You should be stuck in the stairs.

I was able to get stuck 3/4 times. The fourth time I was able to jump through the stairs.

Not sure if this is intended.

I will place the long end towards me next time.



User Specs:
OS: Windows 10 (10.0.0) 64bit
CPU: AMD Ryzen Threadripper 1950X 16-Core Processor (32) System RAM: 32662
GPU: NVIDIA GeForce GTX 1070 Ti GPU RAM: 8080
SotA.Win.64.770.Date.04.30.18
Area: POT_tropicalisland_metropolis_01_template/Blue Rose Isle
Area Display Name: Blue Rose Isle
Loc: (-40.5, 77.9, -184.7)
Debug: UE9UX3Ryb3BpY2FsaXNsYW5kX21ldHJvcG9saXNfMDFfdGVtcGxhdGV8Qmx1ZSBSb3NlIElzbGV8KC00MC41NDksIDc3Ljg5NiwgLTE4NC43MjcpfCgwLCAwLjIxMywgMCwgLTAuOTc3KXwzNy4xMjg0NHwyMS45NDg0Mnw2LjY4MDIzMw==

 

It's not so much that using the printpress causes avatars to get stuck, it is that this is an interactive station that you have wayyyy jammed up in the stairs. I can see why you would get stuck with its current placement, as I checked it out. But I could't get stuck here. You did mention you placed the long end towards you, which is how I see it currently set up.
@Kaffien

 

Long end towards me and it works. if i put the short in towards then you get stuck in the stairs hehehe.